Today's fast-paced urban life and the lack of attention to lifestyle have led to a general sub-healthy state. However, life is a sport. Running is a relatively low-cost, low-limitation, high-appropriate sport. The crowd's sports program is preferred. However, as a runner, I am not limited to the interest in running and pure exercise, but also have my own requirements for equipment.
The most basic and important equipment for running is running shoes and clothes. For the time being, there are still many demands for running, including headphones.
The demand for headphones is seen as the beholder's wisdom. Relatively speaking, running time is more than 20 minutes. If it is only simple running, runners will feel bored during running and even lose patience when running. As a result, many people will increase their access to information while running. Sound has become the most popular option, whether it is with music or listening to blogs.
So, how to pick sports headphones has become a problem. As a type of headset with special purpose, his product design will be very different from the general headset, I experience a lot of sports headphones, simple X-Live continue Z6000 neck Bluetooth headset and Samsung Gear Circle For comparison, feel how this headset works.
The overall appearance is very simple, looks a little refreshing than the Gear Circle, in fact, as a sports headset, I will not use the appearance as the main evaluation criteria, as long as it is not too contrary to my aesthetic point of view, I will pay more attention to his quality and comfort etc.
Sports headphones I tend to prefer neck wear, first, because the stability of the neck is slightly better, you can have a better experience during the exercise, followed by the neck can share a large part of the weight to The neck rather than the ear makes people more comfortable.
There is still a difference between the two. I personally prefer the Z6000. From the overall weight point of view, the Z600 is lighter and the Gear Circle is slightly heavier. However, the Z6000 is actually inferior to Gear Circle when it comes to experience. The most notable thing is that the Z6000 can clearly hear the buzz of the stand... but this is not a big problem. In actual running, it is not obvious. In a running scene, you can almost ignore it.
Compared to the relatively expensive Samsung Gear Circle, the Z6000 still lacks certain aspects in some aspects. The keystrokes give people a relatively cheap feeling, and the keys are all squeezed together. When the blind operation is performed, the buttons cannot be determined by hand. The probability of causing misuse is very high. The GearCircle uses touch control to perform volume adjustment through gesture operations. The actual experience is not only easy to operate, but it is not lacking! The Z6000 is far from this. Another point is that there are only two sets of silicone earplugs, slightly lacking in human services.
One thing worth mentioning in the design is magnetism. This is where Say Goodbye wanders around with headphones. But still did not do the best. The Gear Circle's magnetic attraction is not the same, but when the Gear Circle two headphones are sucked together, it can directly pause the music. After this function I used to use it, there were many tragedies in the Z6000 that were not related to music... I don’t want to. Get up. Therefore, this aspect needs to be improved. After all, good things cannot be returned after a long time.
In addition to these comparisons, the Z6000 still has many commendable advantages. In terms of running experience, the ears are really easy, almost no pressure, and the music playback effect is acceptable. After all, it's good to hear a run. Listening to a ring, ringing, ringing... and as a sports earphone, its waterproof effect is also available, and there is no problem after all sweating.
In general, the Z6000 still has a lot of deficiencies, but it is still worth considering considering the sports earphone product above this price point. As a running enthusiast, in fact, this equipment for sporting headphones is still considered many, if it is true Up, each product always has this or that shortcoming, but if you want to not be too Virgo, the use of the Z6000 will still be a pleasant experience.
---------------
Subsequent official staff responded to the article:
Thanks to @SxKyL's careful experience and in-depth evaluation of X-LIVE's continuous Bluetooth headset. Your comments and suggestions will be fed back to the R&D and product department. Thank you for your comments. Thank you very much. Compared with Samsung, we will work hard, you can look at our official Weibo, @ X-LIVE continued brand official micro, we will launch in the next two weeks two professional running Bluetooth headset, which also You are interested in smart magnetic control functions you mentioned.
Look forward to their new products and see what new highlights will be there
==========================
Copyright @ Yichuan, reproduced please contact the author
Dc Gear Motor can be defined as an extension of Dc Motor which already had its Insight details demystified here. A dc gear motor has a gear assembly attached to the motor. The speed of motor is counted in terms of rotations of the shaft per minute and is termed as RPM .The gear assembly helps in increasing the torque and reducing the speed. Using the correct combination of gears in a dc gear motor, its speed can be reduced to any desirable figure. This concept where gears reduce the speed of the vehicle but increase its torque is known as gear reduction.
Application field: usually used Electronic door locks, shutter motor, home audio equipment, sweep the floor machine robot
Features: dc gear motor drive precision, small volume, large torque, low noise, durability, low energy consumption, customized power design,easy installation, easy maintenance;Simplify design and save space.
Method of use: the best stable in horizontal plane, installed on the dc gear motor output shaft parts, cannot use a hammer to knock,knock prone to press into the dc gear motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Dc geared motors should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Dc geared motors should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of dc gear motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Dc Gear Motor,Gear Box Motor,Gear Reduction Motor,Small Diameter Dc Gear Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com