Most of the current TV version of video software has a speed limit feature. The landlord used to watch TV with Storm TV. After all, it took him as long as an old friend, and the latest version is very useful. But it will grab the speed of other devices at home, such as computers, mobile phones, etc., but often they won the storm ... ... Then share with everyone to solve the ~
In fact, we can limit the maximum speed of a device through the router's own bandwidth control function.
1. Enter the router settings page.
Enter the IP address of the router in the address bar of the browser. The default is usually 192.168.1.1 or 192.168.0.1. Then enter the username and password of the router to log in to the router. The default account password is in the description, and the default account password of many routers. Are admins.
2, open the IP bandwidth control
Find the IP Bandwidth Control function in the router's settings menu. Take the TP wireless router as an example, be sure to check "Enable IP Bandwidth Control" to be effective. Some wireless routers need to restart the router to take effect after the IP control is turned on.
3. Select different IP control rules and fill in the corresponding IP address segment.
Select the IP control mode, such as limiting the maximum bandwidth, retaining the minimum bandwidth, and so on, which can be set to "limit the maximum bandwidth", so that you can control the speed limit to limit the download speed. In the IP address field, enter the IP address of the terminal that you want to control. Here you need to fill in the address field, that is to say fill in an IP range. If you only control one TV, then the starting IP is set to the IP of this TV.
Here's the question: How do we know the IP address of the TV?
Select the "DHCP Server" section in the routing settings and click "Client List". At this point we can see the names, IP and MAC addresses of all the devices connected to this router.
At this time, it is recommended that you bind the MAC and IP of the TV. Otherwise, the IP address of each TV startup may be different.
Enter the MAC address and IP address of the TV in both boxes so that the IP of the TV is fixed by us.
Then follow the above steps, you can limit the speed of the TV, no longer have to worry about affecting other devices ~
ESEN Optoelectronics Technology Co., Ltd, , https://www.esenoptoelectronics.com