The Joint Laboratory for Standard Optical Component Testing is an in-house laboratory for the development, manufacture and use of standard optical components. It is jointly established by a standard optical component manufacturer with relevant laboratory qualifications and a standard optical component certification committee. Jingke Electronics and NVC Lighting Received the first batch of awards.
The main tasks of the laboratory are: to carry out the inspection of standard optical components under the supervision of the dispatched personnel of the subordinate executives; to participate in the revision and revision of the standard optical component test specifications and test syllabus; to participate in the standard optical component detection technology and detection method Research work on testing equipment.
Zhou Mutang, deputy inspector pointed out that LED lighting "standard optical components" is one of the major strategic layouts for promoting the development of LED industry in Guangdong Province. The basic work of the technical management specification system and organizational structure of standard optical components has been basically completed, and the influence and popularity in the industry are constantly expanding, and it has entered the stage of comprehensive promotion and continuous operation.
Antenk dip plug connector Insulation Displacement termination connectors are designed to quickly and effectively terminate Flat Cable in a wide variety of applications. The IDC termination style has migrated and been implemented into a wide range of connector styles because of its reliability and ease of use. Click on the appropriate sub section below depending on connector or application of choice.the pitch range from 1.27mm,2.0mm, and 2.54mm here.
IDC DIP Plug Connectors Key Specifications/Special Features:
Materials:
Insulator: PBT, glass reinforced, rated UL94V-0
Contact: phosphor bronze or brass
Electrical specifications:
Pitch: 1.27/2.0/2.54mm
Current rating: 1A, 250V AC
Contact resistance: 30M Ohms (maximum)
Insulation resistance: 3,000M Ohms, minute
Dielectric withstanding voltage: 500V AC for one minute
Operating temperature: -40 to +105 degrees Celsius
Terminated with 1.27mm pitch flat ribbon cable
Number of contacts: 06,08, 10, 12, 14, 16, 20, 24, 26, 30, 32,34, 40, 50, 60 and 64P
With RoHS mark
Used for ribbon cables
DIP Plug Connectors Application
Wire to Board
Apply to Industries : PC, IPC, Consumer Electronics, Automotive, Home Appliance, Medical
Dip Connector,Dip Plug Connectors,Dip Direct Pulg Connector,IDC Plug Connector,Idc connector dip plug,1.27mm Dip Plug Connector,2.0mm Dip Plug Connector, and 2.54mm Dip Plug Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com