Originally wanted to write a review, the results encountered a Jingdong pit, video card problems can only look out of the box to see the shape, by the way to take the 1070 chase comparison.
As this Sotec 1070, Jingdong has been slow and out of stock, and then drove up to 1070 of the truck (see me 1010 of the evaluation). Then one day after a few days, I received a message from JD. The order was automatically placed and the payment was made.
The result was a big pit. . . as follows
Originally arrived on Saturday, it was a pity that at that time, the address of the automatic order filling was the address of the company. At the end of the week, it did not go to work but had to send Jingdong’s express delivery to my home side until Sunday.
A big box of wafers, huh, huh. . .
Demolition. . .
A large card box inside, as well as an invoice
A few 360 panoramas
The appearance is like this, it looks very big. A lot more than chasing the wind box, forgot to take over.
Continue to tear down
The original outside is just a paper shell, inside this is the box, a very simple shape, only Sotec's logo, it is very simple, but I quite like this simple form.
Unpacking:
To Zhang family portrait, video card + disc + power adapter + and the small fan of Sotec promotion.
To a back of the graphics card, which says support fan start and stop, this is good.
Continue to split. . 360 degree graphics close-up
It can be seen that the power supply is a dual 8-pin power supply. Sotec has a 10-phase power supply. Currently on the market, it is second only to the 18-phase of its own PGF. Double 8-pin logic is a matter of course.
To a few heat dissipation close-up.
The front of the card (in the direction of the outlet) is two pure copper heat pipes.
As you can see from the middle, this heat is divided into two sections, the core cooling and the rear power supply direction, in front of the two heat pipes, and then at this moment I accidentally found that there is a trace of a sticker on this heat sink, is it me? Who received the plate? ? Have you been kicked? Is there a fragile sticker here? ?
A chrysanthemum close-up, chrysanthemum three heat pipes, so this video card is 2+3 five heat pipe cooling? I understand it so. .
There is this port on both sides of the logo light. It should be for the small fan. . However, it affects the appearance. .
Plug in a small fan, it really is to take this mouth, but this little fan has no effect does not feel reliable, but better than nothing.
The description is also very personal, open is a poster. .
Text of the specification (Please ignore my daughter's ankle)
The front is a poster (again ignoring my daughter's messy hands)
Third, compared with the cultivating 1070 chasing version.There is a 1070 chase on the hand, remove it and compare it intuitively. .
It can be seen from the front that Sotec will be longer and the cultivator will be wider. Sotec's shell is like plastic, and ploughing is metal.
The backboard has a backboard. Sotec's color is lighter and looks brighter.
On the side, it can be seen that Sauter has a lot of thickness, and the heat sink is relatively thick. It should be better to dissipate heat.
Tail power supply, Sotec is double 8pin, Herd is 8+6.
Stacked together to see. gap.
Plowing should be more than 1cm wide.
Not opened, only external observations.
Appearance: Sotec is like a plastic shell, but the paint is better. It looks like the gloss will be more beautiful. Although the wind is a metal shell, the color matching and baking is not very good, but it is rough, and it looks like the texture is low. However, in fact, the metal shell that has been cultivated should be more worthy of promotion.
Size: ploughing seems to be 28 or so, Sotec is 30, and the length of the two models is about 2 cm. The width of the cultivator should be more than one centimeter wide. The cultivator is a double big milk. Sotec is three small milk. The thickness of Sotec's heat sinks is much thicker.
Logo, etc.: Both have a logo light, Sauter is a color rgb light, you can see the breath on the boot, you can adjust the color of the software, the fan interface on both sides affect a little beautiful, personal feel that the interface design at the bottom of the card is estimated better . Can't see the line. The official website of the logo light official website says that it is an rgb light, but in fact it is only red when it is turned on. The official website software does not currently see any tools that support discoloration. Temporary single red argument.
Fourth, on the opportunity pit Installed:
Into my small chassis is just
Look at the edge, it is 1 centimeters, risk insurance into it. Fortunately, my chassis nominal 31cm graphics card length or foot.
Then boot. . . .
The light is on, the breathing light is flashing, it is dazzling, but... a shrill noise, the sound is huge! ! ! . . . Wo ca, scared me immediately power off.
Carefully studied, the output port of the graphics card turns the jerky direction and the noise caused by friction with the underground cooling fins. .
Remove the video card and seriously look, this turned a few seconds there is a scratch, which continues to turn a few minutes fan blades can not collapse a few pieces can not be. .
The support steel turned out to be curved. . . No wonder the blades will hit the bottom. .
Jingdong, there is nothing to say, exchange of goods. . Although you can open your own pliers, you can correct it. but. There is a problem for those who want to buy new products themselves, and there are traces of stickers that have been found before, and it is doubtful that they will do a reckless job and make decisive changes. . . In fact, I really want to return to order, but unfortunately Jingdong this is basically out of stock, forget. Change it. . ,
V. Follow-upI have to say that Jingdong's after-sales service is really good. I submitted a replacement application for after-sales service. After a few screenshots were taken, it was passed in less than half an hour.
Takeaway in the morning. . . Follow-up evaluation continues next time. . Let us take a look at the shape first. Ha ha.
So this is just a drying post, not an evaluation. Forgive me. . .