Elc-SMS Hiah Quality Intelligent Controller PLC

Model NO.: ELC-SMS
Condition: New
Customized: Customized
Material: Aluminum Alloy
Intelligent Controller PLC: Elc-SMS
Trademark: cnruihua
Transport Package: 50 PCS for One Carton
Specification: ce rohs
Origin: Wenzhou
Model NO.: ELC-SMS
Condition: New
Customized: Customized
Material: Aluminum Alloy
Intelligent Controller PLC: Elc-SMS
Trademark: cnruihua
Transport Package: 50 PCS for One Carton
Specification: ce rohs
Origin: Wenzhou
Eneral Introduction

-----SMS Module
ELC-SMS-D-Rmodule is a remote control and messaging system, also is a expansion moduleconnected to ELC-18 CPU module, that's to say you would link it to the CPUmodule when you want to use it work.

Sixdigital inputs and four relay outputs with alternating contacts are monitoredby means of a SMS (Short Message System) via a mobile telephone network* (SIMcard determines the provider).

Additional 10 message inputs and 10 messageoutputs are supplied in software through which you can switch the input statusand get alarm messages by SMS. Because it used as expansion module, thefunction blocks usually used in PLC would be used by ELC-SMS module to realizesome complex control function by means of short messages.

The device's own phone book saves up to 5 mobile phone numbers of the receivers. Each status change from "0"to "1"at the message output sends apre-defined message by SMS to the selected receivers.

The receivers areprocessed cyclically, according to the order chosen. The message inputs can beswitched on and off by means of a pre-defined message by SMS. In order to obtain an overview of the stateof the installation, the input and output status can also be queried by SMS, but you must special pre-design your program in software because the shortmessage only change the message input status and cannot change the physicalinput status directly.

Theprogramming of the ELC-SMS is carried out with the xLogicSoft. In this way thesettings can be configured conveniently, flexiblely and easily. *GSM network: 850MHz, 900MHz, 1800MHz, 1900MHz (quad-bandGSM module inside)
Notes: Pleaserefer to ELC series products user's manual about the information ELC-18 seriesCPU module

Short instructions
1. Select akind of ELC-18 series CPU module (PLC).
2. LinkELC-SMS to CPU module
3. Connect theRS232/USB interface of your PC or Notebook with the programming interface ofthe CPU module. Use the programming cable (ELC-RS232/ELC-USB)
4. Nowswitch on the CPU module and ELC-SMS.
5. Chooseyour prepared file or create a new file with your configuration.
6. Select afree COM port (Menu Configuration Select port)
7. SelectSMS model. (refer to page 15) xLogic SuperRelay-----SMS Module
8. Download the fileto the CPU module ( download)9. Placethe SIM card in the card holderNote: Pleasenote the modules' respective voltage class. The ELC-SMS-D-R is the DC 24V type.

2000 Pairs Sells per Month
5 pairs MOQ
48-72 hours delivery after received money

About US
YUEQING CITY RUIHUA CABINET WHOLE SET EQUIPMENT is a professional manufacturer of 
low voltage electrical products in South China. 
Our company is committed to design, produce and sale a series of ozone generators air pumps, 
PLC, rotary encoders, HMI, sensors, switches , warning lights, meters and many other electrical 
components. We exports various types of electrical appliances to different countries.

FAQ
Q: Are you a manufacturer or a trade dealer?
A: We are manufacturer with our own factory and trading company.
Q: When did your company start to manufacture the products?
A: We started from the year of 2005.
Q: How can I get some samples?
A: You can send email, buy from our online shop or call us for sample order.
Q:.Can I just buy 1pc sample first or small order?
A:Yes,support sample order and small order, especially for new customers.
Q:.How long to make a sample?
A: We have plenty of stock to support sample order and small order.
Q: Is the sample fee refundable or not?
A:Due to the producing cost is high, we need charge sample fee.
Q:What certification do you have?
A:We have got CE, RoHS certification for our products.
Q:Can I put my own logo?
A:Yes, your logo can be engraved, embossed, transfer-printing or lasered etc.
Q:Is the price including duty?
A: This price does not include customs fee, local taxes, or brokerage fee.
Q:How good is your service and after-sales service?
A: We have excellent customer service & technical support &1-year warranty police to meet all your requirements.
Q: How do your company regard on quality control?
A:Quality is priority. We think highly of quality controlling.

About Payment
 
We provided Trade Assurance service 
We also accept payment by T/T; Western Union, ESCROW, Paypal, Money gram
 
We Provide OEM Services
We can do OEM for your brand (print your logo ). And we can make product according to your design .
The processing method ,the size ,the quality etc ,will all follow your requirement .
 
We do OEM for a lot of the world's leading brands ,we have rich experience in production. We have molds in varieties ,and we have strict  products quality control system.
 
We have a strong R&D team, to develop new products according to the sample you provided.
  Eneral Introduction

-----SMS Module
ELC-SMS-D-Rmodule is a remote control and messaging system, also is a expansion moduleconnected to ELC-18 CPU module, that's to say you would link it to the CPUmodule when you want to use it work.

Sixdigital inputs and four relay outputs with alternating contacts are monitoredby means of a SMS (Short Message System) via a mobile telephone network* (SIMcard determines the provider).

Additional 10 message inputs and 10 messageoutputs are supplied in software through which you can switch the input statusand get alarm messages by SMS. Because it used as expansion module, thefunction blocks usually used in PLC would be used by ELC-SMS module to realizesome complex control function by means of short messages.

The device's own phone book saves up to 5 mobile phone numbers of the receivers. Each status change from "0"to "1"at the message output sends apre-defined message by SMS to the selected receivers.

The receivers areprocessed cyclically, according to the order chosen. The message inputs can beswitched on and off by means of a pre-defined message by SMS. In order to obtain an overview of the stateof the installation, the input and output status can also be queried by SMS, but you must special pre-design your program in software because the shortmessage only change the message input status and cannot change the physicalinput status directly.

Theprogramming of the ELC-SMS is carried out with the xLogicSoft. In this way thesettings can be configured conveniently, flexiblely and easily. *GSM network: 850MHz, 900MHz, 1800MHz, 1900MHz (quad-bandGSM module inside)
Notes: Pleaserefer to ELC series products user's manual about the information ELC-18 seriesCPU module

Short instructions
1. Select akind of ELC-18 series CPU module (PLC).
2. LinkELC-SMS to CPU module
3. Connect theRS232/USB interface of your PC or Notebook with the programming interface ofthe CPU module. Use the programming cable (ELC-RS232/ELC-USB)
4. Nowswitch on the CPU module and ELC-SMS.
5. Chooseyour prepared file or create a new file with your configuration.
6. Select afree COM port (Menu Configuration Select port)
7. SelectSMS model. (refer to page 15) xLogic SuperRelay-----SMS Module
8. Download the fileto the CPU module ( download)9. Placethe SIM card in the card holderNote: Pleasenote the modules' respective voltage class. The ELC-SMS-D-R is the DC 24V type.

2000 Pairs Sells per Month
5 pairs MOQ
48-72 hours delivery after received money

About US
YUEQING CITY RUIHUA CABINET WHOLE SET EQUIPMENT is a professional manufacturer of 
low voltage electrical products in South China. 
Our company is committed to design, produce and sale a series of ozone generators air pumps, 
PLC, rotary encoders, HMI, sensors, switches , warning lights, meters and many other electrical 
components. We exports various types of electrical appliances to different countries.

FAQ
Q: Are you a manufacturer or a trade dealer?
A: We are manufacturer with our own factory and trading company.
Q: When did your company start to manufacture the products?
A: We started from the year of 2005.
Q: How can I get some samples?
A: You can send email, buy from our online shop or call us for sample order.
Q:.Can I just buy 1pc sample first or small order?
A:Yes,support sample order and small order, especially for new customers.
Q:.How long to make a sample?
A: We have plenty of stock to support sample order and small order.
Q: Is the sample fee refundable or not?
A:Due to the producing cost is high, we need charge sample fee.
Q:What certification do you have?
A:We have got CE, RoHS certification for our products.
Q:Can I put my own logo?
A:Yes, your logo can be engraved, embossed, transfer-printing or lasered etc.
Q:Is the price including duty?
A: This price does not include customs fee, local taxes, or brokerage fee.
Q:How good is your service and after-sales service?
A: We have excellent customer service & technical support &1-year warranty police to meet all your requirements.
Q: How do your company regard on quality control?
A:Quality is priority. We think highly of quality controlling.

About Payment
 
We provided Trade Assurance service 
We also accept payment by T/T; Western Union, ESCROW, Paypal, Money gram
 
We Provide OEM Services
We can do OEM for your brand (print your logo ). And we can make product according to your design .
The processing method ,the size ,the quality etc ,will all follow your requirement .
 
We do OEM for a lot of the world's leading brands ,we have rich experience in production. We have molds in varieties ,and we have strict  products quality control system.
 
We have a strong R&D team, to develop new products according to the sample you provided.
 

The compact FujiFilm Instax Mini 8 Camera preserves the ease of use and attractive design elements of the existing Instax Mini series. At the same time, the Mini 8 cameras offer new features and enhancements. You will instantly notice a slimmer and lighter body. The Instax Mini 8 is approximately 10 percent smaller than the Mini 7S in volume ratio. It is now even easier for the consumer to carry around an INSTAX with them everywhere. The Fujifilm Instax Mini 8 Camera features automatic exposure measurement. The camera signals the recommended aperture setting with a flashing LED light and the user can manually adjust the dial to the recommended setting. This helps the user capture the perfect photo every time. A High-Key mode is available on the Instax Mini 8 cameras. This mode enables consumers to take brighter pictures with a soft look - perfect for portraits. The viewfinder has also been improved for enhanced subject viewing. 


Instax Mini 8

Instax Mini 8,Instax Mini 8 Camera,Instant Camera Mini 8,Instax Mini 8 Pink

GuangZhou CAIUL Digital Products CO,.LTD. , http://www.caiul-instax.com