Model NO.: cable
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: QIFAN
Trademark: HBSR
Transport Package: 500mcm XLPE Insulated Copper Power Cable Pack
Specification: 0.6/1KV
Origin: Hebei, China
Model NO.: cable
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: QIFAN
Trademark: HBSR
Transport Package: 500mcm XLPE Insulated Copper Power Cable Pack
Specification: 0.6/1KV
Origin: Hebei, China
DescriptionScope This product applies to dry AC rated voltage of 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with ordinary plastic insulated control cable, insulation using fluorine plastic, the product has higher than the ordinary control cable Heat-resistant grade, with oil, waterproof, wear-resistant, corrosion-resistant gas, anti-aging, non-combustible and other excellent performance, is mainly used in metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions. Implementation of the standard Q/321084KLA076 use characteristics 1, AC rated voltage: Uo / U is 450/750V.
Executive standard
Q/321084KLA076
Scope of application
This product is suitable for dry AC rated voltage 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with the ordinary plastic insulated control cable, the insulation uses fluorine plastic, the product has higher heat resistance than the ordinary control cable Grade, with oil, water, wear, corrosion resistance gas, anti-aging, non-combustible and other excellent properties, mainly applicable to metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions.
Use characteristics
1. AC rated voltage: Uo/U is 450/750V.
2. The long-term allowable working temperature of the cable conductor is: 200 °C for fluorine plastic, 105 °C for polyvinyl chloride, and 180 °C for silicon rubber.
3, the installation temperature of the cable should not be lower than: PVC sheathed cable 0 °C, silicon rubber sheathed cable -20 °C, fluorine plastic sheathed cable -20 °C.
4, the minimum ambient temperature:
PVC sheathed cable fixed laying -40 °C, non-fixed laying -15 °C,
Silicone rubber sheathed cable fixed laying -60 °C, non-fixed laying -20 °C;
Fluorine plastic sheathed cable fixed laying -60 °C, non-fixed laying -20 °C.
5, cable allow bending radius:
Cables without armouring shall not be less than 6 times the outer diameter of the cable;
Armored cable or cable with copper shield structure shall not be less than 12 times the cable's outer diameter;
The flexible cable with shield structure should not be less than 6 times of the cable outer diameter.
Technical Parameters
Factory Show
Related Products
Packing&Shipping
FAQ
Q1 :What kind of company are you?
A1:We are a professional engaged in a variety of power tools research and development, production, sales and construction services as one of the modern high-tech enterprises.
Q2:Can i get free samples?
A2:We could send you the samples ,most samples are free to you,but transport fee should be paid by you.
Q3:How long is your delivery time?
A3: Normally 10-25 days after deposit made.If you are urgent it can be negotiable.
Q4:What's the MOQ?
A4:Different products the MOQ is different.Please contact with our salesman.If we have stocking,we can make for you small quantity.If you need to make customized,the MOQ should be according to our production. Description
Scope This product applies to dry AC rated voltage of 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with ordinary plastic insulated control cable, insulation using fluorine plastic, the product has higher than the ordinary control cable Heat-resistant grade, with oil, waterproof, wear-resistant, corrosion-resistant gas, anti-aging, non-combustible and other excellent performance, is mainly used in metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions. Implementation of the standard Q/321084KLA076 use characteristics 1, AC rated voltage: Uo / U is 450/750V.
Executive standard
Q/321084KLA076
Scope of application
This product is suitable for dry AC rated voltage 450/750V and below the electrical instrument cable and automatic control system transmission line, it is compared with the ordinary plastic insulated control cable, the insulation uses fluorine plastic, the product has higher heat resistance than the ordinary control cable Grade, with oil, water, wear, corrosion resistance gas, anti-aging, non-combustible and other excellent properties, mainly applicable to metallurgy, electric power, petrochemical and other industries with mobile temperature and other special occasions.
Use characteristics
1. AC rated voltage: Uo/U is 450/750V.
2. The long-term allowable working temperature of the cable conductor is: 200 °C for fluorine plastic, 105 °C for polyvinyl chloride, and 180 °C for silicon rubber.
3, the installation temperature of the cable should not be lower than: PVC sheathed cable 0 °C, silicon rubber sheathed cable -20 °C, fluorine plastic sheathed cable -20 °C.
4, the minimum ambient temperature:
PVC sheathed cable fixed laying -40 °C, non-fixed laying -15 °C,
Silicone rubber sheathed cable fixed laying -60 °C, non-fixed laying -20 °C;
Fluorine plastic sheathed cable fixed laying -60 °C, non-fixed laying -20 °C.
5, cable allow bending radius:
Cables without armouring shall not be less than 6 times the outer diameter of the cable;
Armored cable or cable with copper shield structure shall not be less than 12 times the cable's outer diameter;
The flexible cable with shield structure should not be less than 6 times of the cable outer diameter.
Technical Parameters
Factory Show
Related Products
Packing&Shipping
FAQ
Q1 :What kind of company are you?
A1:We are a professional engaged in a variety of power tools research and development, production, sales and construction services as one of the modern high-tech enterprises.
Q2:Can i get free samples?
A2:We could send you the samples ,most samples are free to you,but transport fee should be paid by you.
Q3:How long is your delivery time?
A3: Normally 10-25 days after deposit made.If you are urgent it can be negotiable.
Q4:What's the MOQ?
A4:Different products the MOQ is different.Please contact with our salesman.If we have stocking,we can make for you small quantity.If you need to make customized,the MOQ should be according to our production.
Dry Cell Battery,Starter Car Battery,Din Car Battery
Motorcycle Battery Co., Ltd. , http://www.nscyclebattery.com