The last article said that five years old master machine replacement graphics card, these days the weather is hot, this master machine also out of the situation, from time to time to play the game occasionally a blue screen, the frequency is not high, then open aida carefully looked at the temperature turned out to be like this
When the fan was removed and cleaned, the temperature was still the same. In five years, this original fan was really incompetent (although there may be a silicone grease problem).
A little research, 99 blocks of this level have t400i, b48, there is this scythe red rabbit horse
In front of the two aunts, they all have clothes orders. The red rabbits haven’t bought new ones and don’t buy old ones.
Appearance Gallery Second-hand packaging sent to East is a bit old
One pack buckle
A simple installation instruction
Remove the chassis and remove the old fan. The four corners can be pulled down.
Clean old grease with alcohol
The four corners still have some traces that cannot be cleared, regardless
Under the back board
There is an empty space in the chassis here to save a lot of time
The buttons are coated with silicone grease and they are ready to go.
A small packet of silicone grease is enough
Fasten the fan to the heat sink. There is a wind direction arrow on the fan 
After the installation of 4 red led lamp beads, is not that the wind a little problem. . . Fan mounted heat sinks on both sides, can also hold two fans
Last new temperature map
This return is normal, and it is much quieter than the original fan.
To say that the advantage is flawless, the installation is really simple.
China leading manufacturers and suppliers of DC Support Capacitors,DC Capacitor, and we are specialize in Electrolytic capacitor,High Voltage Capacitor, etc.DC Support Capacitors
DC Support Capacitors,DC Capacitor,Electrolytic Capacitor,High Voltage Capacitor
YANGZHOU POSITIONING TECH CO., LTD. , https://www.pst-thyristor.com