“Philips Lumileds can achieve 2000lm$ before 2020â€, Zhou Lujun, Marketing Director of Asia Pacific, Philips Lumileds, on December 18th, at the 2010 Gaogong LED Engineer Conference and Philips Lumileds LED Epitaxial Chip Seminar hosted by Gaogong LED disclose.
According to the US Energy Star data, "LED can achieve 1000lm$ in 2020". If Philips Lumileds is expected to become a reality by 2020, it is obviously more shocking than the US Energy Star.
Philips Lumileds Asia Pacific Marketing Director Zhou Xuejun
According to Zhou Xuejun, it is based on the price of “2000lm$†that Philips Lighting dared to be so optimistic that “the global market penetration of LEDs on lighting fixtures exceeds 50% in 2015 and more than 75% in 2020â€, LED The overwhelming superiority in price can reach 75% of the market share in 2020.
In the speech, Zhou Xuejun believes that "from the perspective of our upstream manufacturers, there are three driving forces for LEDs to be widely used: light efficiency (lmw), lm$, light quality. lm$ is related to consumer recognition, light quality Will become a very hot topic next year. When mass production of 100-120 lmw is not a problem, light quality will become an increasingly important issue, especially when entering indoor lighting, color consistency, color indifference, high The color rendering index, which is a must for indoor lighting."
PCB = printed circuit board and PCBA = printed circuit board assembly. For PCB, it means the copper circuits be printed on a board, and so the main composition are copper and board.
The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.
The PCB board could be rigid PCB, could be flex PCB and also could be Flex-Rigid PCB. And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.
We are the one-stop shop for all kinds of PCB manufacture service from PCB Prototype to big volume, which could save our customers a lot of time and money.
PCB Manufacture Capabilities
|
Features |
Capabilities |
|
Layers |
1-36 layers |
|
Material |
FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc. |
|
PCB Type |
FR-4 Standard PCB , Aluminum PCB , Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick Copper PCB and Rogers PCB, etc. |
|
Board Thickness |
0.1mm-6.0mm |
|
Copper Thickness |
1/2oz-6oz(18um-210um) |
|
Biggest Board size |
600mm*1200mm |
|
Min Tracing/Spacing |
0.075mm/0.075mm (3mil/3mil) |
|
Min drilling Hole diameter |
0.15mm(6mil), 0.1mm(4mil)-laser drill |
|
Solder Mask |
Green, Black, White, Red, Yellow, Blue and Purple, etc. |
|
Silkscreen color |
White, Blue, Black, Red, Yellow |
|
Surface finish |
HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc. |
|
Special Techniques |
Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc. |
PCB Products Show
PCB Factory Show
PCB
PCB Board,PCB Prototype,PCB Electronics,PCB Fabrication
ZhongFeng Electronic Technology Co., Limited , http://www.dopcba.com