Millet box loading failed
Millet box failed to load solution
There are several possible reasons for the failure of the millet box loading. Afterwards, the authors analyzed each of these possibilities and found out the correct solution to the failure of loading the millet box.
1, network environment issues
We all know that the network set-top box products represented by millet boxes need the Internet to provide support. Without a stable network environment, the box can't be played at all. If the millet box is still good during the day, the millet box at night cannot be read and restarted. The box is useless, so the question you first consider is whether the network is stable.
You can check the current network speed of the millet box. The millet box system settings provide the network speed test function, as shown in the following figure:
If the network environment is poor, the reason may be as follows.
At present, there are many broadband service providers, such as mobile, telecom, Great Wall, and Railcom, which provide different network broadband stability. Among them, telecommunications and mobile services are the most reliable ones, and Tietong and Great Wall are relatively poor. The stability is poor, and the speed of the network is slow, especially at night when the peak of the network is used, so if you are the Great Wall, China Railcom users should consider changing the network.
If there is no network, what about the millet box?
You can try to change the DNS address of the millet box. If the millet box and the address of the router are not in the same network, the box is also without a network. For example, if your route is: 10.0.9.166.207, then the address of your millet box should be: 10.9. 166.XX. What if the problem really appears here? Set fixed IP address, mask, and DNS.
Scenario 1: Turn on Router DHCP
Scenario 2: Modify the millet box to one of the following addresses, 192.168.0.XX (2-254), so that the DNS and router have the same address. Once it is still invalid, restore the factory settings and see how it works.
If the network is normal, then the reason for the failure of the millet box to load is other aspects.
2, system update issues
If the millet box network is normal, you can check whether the millet box has a new firmware release (sometimes due to its own BUG, ​​the box is also not normal use), choose to update the system to see if you still can not see, then another reason is .
3, millet box server problem
The millet box server has been criticized for a long time. The problem has not been once or twice. Is the millet box loading failure a problem with the millet box server? Install several third-party TV softwares, such as Tai Jie video, cats, TVs, etc., to see if they can see. If you can see, then it must be a problem with the Xiaomi box server. You can only wait for the official repair.
KNL6,KNL8 Residual Current Circuit Breaker
KNL6,KNL8 Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNL6,KNL8 Molded Case Circuit Breaker,Small Size Molded Case Circuit Breaker,Electrical Molded Case Circuit Breaker,Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmoldedcasecircuitbreaker.com