Ignition engine testing is an important part of automotive manufacturing. It requires long-distance test sites and control rooms to perform real-time data interactions, allowing operators to respond to field problems in a timely manner while accepting control center commands and making adjustments accordingly. However, due to the harsh environment at the test site, strict requirements were imposed on the stability of the equipment. ORing's outdoor serial serial wireless networking solution can meet this application requirement of customers.
Program requirements:
Unlimited, long-distance wireless transmission
Harsh outdoor environment ensures reliable operation
Easy to use, efficient and centralized management
Design:
Each ignition test engine at the remote site is equipped with an IDS-5042-WG, which collects field test data and accepts control center commands through the serial port. All data collected by the IDS-5042-WG is transmitted wirelessly to the field end APIAP- 6701-WG+.
The IAP-6701-WG+ is deployed in the control center to connect the APs at the field, so that the test site and the control center can communicate with each other. Each AP will be mounted on a high pole so that wireless signals can be transmitted unimpeded without being disturbed by any ground obstacles; in addition, the IAP-6701-WG+ is equipped with a PoEP.D. port. The network cable is powered directly to avoid installing additional power cords.
After the network is connected, the operator can receive test commands at any of the test sites, and any changes made by the control room can be synchronized with the site in real time. In addition, the control room staff can also monitor the test in real time and make the necessary adjustments according to the results obtained.
Technical advantages:
Serial wireless networking for easy, fast and unlimited network deployment
IP-67 waterproof and dustproof casing, working at -40 ° C ~ 70 ° C wide temperature;
Multiple secure transmission modes such as authentication encryption, MAC address filtering and password protection to ensure data security
PoEP.D port is powered directly, eliminating the need for additional power configuration
Our banknote handling machines mainly include following
BC -30: basic piece counter with only one UV
BC-35: piece counter with UV MG
BC-40: value counter with one CIS, support 4 currencies, Auto recognition, multi-currency mix counting
BC-55: value counter with two CIS, support 40 currencies at the same time, serial number reading, Auto recognition, multi-currency mix counting, remote software upgrading via network
Those 4 models have similar structure, passage can be opened from reat side, easy for maintenance and cleaning
BCS-160: 1+1 Pockets Banknote Sorter with two CIS, support 20 currencies at most, serial number reading
Banknote Deposit Machine,Mixed Denomination Cis Banknote Counter,High Speed Euro Banknote Counter,Mixed Denomination Cis Banknote Counter
Suzhou Ribao Technology Co. Ltd. , https://www.ribaoeurope.com