Solution for General Failure of Headspace Sampler

Exclude

Headspace Sampler

Suffering from general failure

,

List the following points and hope to provide useful information to everyone.

The following steps are used as a general method of troubleshooting:

1

, observe the symptoms of the headspace sampler problem.

2

, examine HS status display and logs, especially sequence logs and event logs. Examine GC logs, events, and displays. If you are using a data system, also check the data system log. These logs also contain useful information that directly indicates the source of the problem.

3

, consider what changes have been made recently. See "What's changed?"

4

, analyze whether GC can cause this symptom.

5

Use the table of contents or search tool to find these symptoms in this manual. Review a list of possible causes of symptoms.

6

, check every possible cause or perform a test to narrow down the list of possible causes until the problem is resolved. [Status] Be sure to use this key when using this troubleshooting information. Press [Status] on the HS keyboard with [Info] key. Press these keys to display other useful information about the state of its components.

If a problem occurs, a status message will be displayed. If the message indicates a hardware corruption, you can view more related information. Press [Status], you can cycle through the status view to see more detailed error messages.

When troubleshooting a headspace sampler, keep in mind the following: Resolving sudden changes can often involve changing consumables, calling the correct method, or replacing a faulty part. If the problem occurs suddenly, look at what has changed. Incidents are usually caused by discrete events such as maintenance, changes in gas sources, changes to other methods or analyses, and component failures.

Beijing Huasheng Spectrum Instrument Co., Ltd. manufactures and sells professional chromatographs and accessories.