What are the correct ways to use the stainless steel transfer window? -Huaqiang Electronic Network

Probe domestic switch needle KG-300K, needle head diameter is 3.0mm, normally open switch needle

MOS power IC full range

KKST patch plug-in active passive crystal oscillator, hot sale at 24.576000MHZ

Stainless steel transfer window

The stainless steel transfer window is an air purification equipment commonly used in clean workshops. It is ideal for transferring small to medium-sized items between clean rooms and non-clean areas, helping to minimize the frequency of door openings and thus reducing the risk of bacterial contamination in controlled environments.

Proper usage of the stainless steel transfer window is essential to ensure its longevity and effectiveness. Following the correct procedures not only extends the product’s lifespan but also ensures that the items being transferred remain free from contamination.

1. During operation, both doors of the stainless steel transfer window should remain closed. Before use, connect the power supply by plugging in the power cord to a 220V/50Hz power source. This activates the built-in lighting system for better visibility during transfers.

2. If sterilization is required, turn on the ultraviolet sterilization lamp. Once activated, it will begin the disinfection process according to standard protocols. Ensure all items are fully sanitized before moving them through the window.

3. For electronic interlocking models, opening one door automatically locks the opposite side. When transferring items, first open the door, place the item inside, then close the door. After completing the sterilization cycle, you can open the other side door. Always make sure to close the door immediately after retrieving the item to prevent any disruption to future transfers.

4. After using the transfer window, always turn off the power switch and unplug the device to ensure safe operation and reduce energy consumption.

By following these guidelines, users can maximize the efficiency and safety of the stainless steel transfer window, making it a reliable tool in cleanroom environments.