Kind
Product
Minute
Analysis
Newspaper
Report
Batch Number: R11A6S2303
Material: Hyper 0DS2 C18
Flow Rate: 1.0 ml/min
Mobile Phase: Acetonitrile : Water = 10:90
Pressure: 10.0 MPa
Column Length: 200 mm
Detector: DAD at 314 nm
Column Diameter: 4.6 mm
Injection Volume: 20 µL
#
Component Name
Retention Time (min)
Peak Height (mV)
Peak Area (mV·s)
Area Percentage (%)
1
Paclitaxel
11.46167 203.14 2848.82 99.6799
2
Unknown
12.60000 1.49 9.15 0.3201
This report provides a detailed analysis of the Paclitaxel sample, which was tested under standard HPLC conditions. The sample was found to be in good condition, with a high purity level of 99.6%, meeting all required specifications. The retention time for Paclitaxel was recorded at 11.46 minutes, and the peak area was significant compared to the unknown compound detected at 12.60 minutes. The solubility test confirmed that the compound is well soluble in methanol, which is an important factor for further use in pharmaceutical applications. The storage conditions were maintained at 4°C, ensuring the stability of the sample. This data can be used for quality control and further research purposes.
Semiconductor Fuse and Ferrite
Fuse refers to an electric appliance that, when the current exceeds the specified value, melts the fuse and disconnects the circuit with the heat generated by itself.When the current exceeds the specified value for a period of time, the fuse melts and disconnects the circuit with the heat generated by the fuse itself.A current protector made from this principle.The fuse is widely used in high and low voltage power distribution system and control system as well as power equipment.
Ferrite is a metal oxide with ferrous magnetism.As far as electrical properties are concerned, the resistivity of ferrite is much larger than that of single metal or alloy magnetic materials, and it has higher dielectric properties.Ferrite magnetic energy also shows high permeability at high frequencies.As a result, ferrite has become a non-metallic magnetic material widely used in the field of high frequency and weak current.Due to the low ferrite magnetic energy stored in the unit volume, saturated magnetic induction strength (Bs) and low (usually only pure iron 1/3 ~ 1/5), and thus limits its higher requirements in the low-frequency magnetic energy density in the field of high voltage and high power applications.
Semiconductor Fuse and Ferrite,Fuse Cutout, Protection Fuse, Square Fuse, Fuse Link, Ceramic Fuse
YANGZHOU POSITIONING TECH CO., LTD. , https://www.yzpst.com