Tesla finally released the first model 3 for the mass market last month, which is expected to be delivered before the end of 2017. This car will be the key to helping Tesla achieve its goal of producing 500,000 cars a year by 2020. But for Tesla, to produce more cars, it needs to produce more batteries. Tesla CEO Elon Musk said at the Model 3 conference last month: "If we want to produce 500,000 cars a year, we need to absorb lithium battery production all over the world. This is The reason we built the Giga factory."
The Giga plant is located in Sparks, Nevada and is expected to be completed by 2020. After completion, the Gigabit plant's battery production will exceed the combined output of all other lithium battery plants worldwide. But what is shocking is not just its size. Here are the 8 coolest innovations in the Giga factory.
The Giga Mill plant covers 10 million square feet and will be one of the largest buildings in the world. Tesla said the Giga plant will be the world's second-largest building, behind Boeing's aircraft manufacturing facility in Everett, Washington.
The Giga plant will not use fuel energy at all. Like Tesla's cars, Gigabit plants will not use fuel energy at all. This means that natural gas pipelines will not appear inside and around the plant, nor will there be diesel generators in the factory.
Solar panels will be placed on top of the Giga plant. Musk is also the co-founder of solar company Solar City, and it is unclear whether Solar City will provide solar panels for the Tesla Gigatron plant. According to a Tesla spokesperson, Solar City needs to compete in order to get orders from Tesla.
Tesla will also use geothermal energy and wind energy to meet the energy needs of Gigatron plants. Tesla said: "For Gigabit plants, our strategic plan is to achieve zero consumption. We intend to use solar energy, wind energy and fixed storage to meet energy demand. Our goal is that all energy must be renewable."
The Gigatron plant considered seismic factors during construction. To achieve this goal, the Giga plant consists of four different structures built on four different foundations. According to the Reno-Gazette Journal, the cost of just spending on the foundation reached $16 million.
The robot will assist in assembling the battery pack. According to the Las Vegas Review-Journal, the Gigabit plant will use robotic arms to assist workers in assembling battery packs produced at the factory. According to a batch of pictures leaked out in March, there are some “automated guided vehicles†in the Giga factory. Therefore, the Gigabit factory will use several different robots to help it make batteries.
There will be a state-of-the-art recycling center in the Giga factory. Recycling will play an important role in the Giga plant. Tesla intends to recycle lithium batteries on site, and the recycling system can extract metals such as nickel, aluminum and lithium from the old batteries and then use them to produce new batteries.
Lock Motor product introduction:
Intelligent Lock Motor, also known as electronic locks, the product effectively combines the advantages of traditional electronic locks and electromagnetic lock overcame the electric lock too much noise, electromagnetic lock power shortage and the development of new products, and spiritual compared with electric control lock and magnetic locks, lock its performance more perfect, more obvious advantages.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features:Lock motor is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the lock motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc lock motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
lock motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
lock motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of lock motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Lock Motor
Lock Motor,Intelligent Lock Motor,Smart Lock Motor,Fingerprint Lock Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com