- Model NO.: FST-6-W
- Certification: ISO9001, CE
- Display Type: LCD
- Color: Black
- Usage: Air Conditioner, Drying Equipment
- Material: Stainless Steel
- Transport Package: Plywood Case/ Wooden Package
- Origin: Guangdong China
- Customized: Customized
- Brand: Simi
- Heating Type: Oil
- Type: Temperature Controller
- Control Type: Digital
- Trademark: SIMI
- Specification: CE
- HS Code: 90321000
*The temperature control adopted Japanese. Germany, Taiwan. Precise and reliable, if can control within +- 1º C and save electricity over 35%;
*Two sets of electric heater cylinder made from stainless steel;
*Emplaying supeb imported components, with longer terms of service;
*Rapid heating and cool off speeds, temp kept stable at times;
*Complete with safety protection and indication system.
| Auto drain sir system | Â | Â | Â | Â | Â | Â |
| Main circult-breaker | Â | Â | Â | Â | Â | Â |
| Purmp reverse protect and direct lamp | Â | Â | Â | Â | Â | |
| Alarm overheat thermostat | Â | Â | Â | Â | Â | Â |
| By-pass circuit | Â | Â | Â | Â | Â | Â |
| Overheat thermostat and direct lamp | Â | Â | Â | Â | Â | |
| Oil shortage protect and direct lamp | Â | Â | Â | Â | Â | |
| Specifications | Oil Type | |||||
| Model | FST-3-0 | FST-6-0 | FST-9-0 | FST-12-0 | FST-6H-0 | FST-12H-0 |
| Control Range | normal-160& ordm; C | nomal-200& ordm; C | ||||
| Voltage | 3PHASE 380v  50Hz or 60Hz   | |||||
| Cooling Methold | Indirect Cooling | |||||
| Fluid | Heat Transfer Oil | |||||
| Heating Capacity KW | 3 | 6 | 9 | 12 | 6 | 12 |
| Pump Power | 0.375 | 0.375 | 0.375 | 0.75 | 0.375 | 0.75 |
| Max Pump Pressure KW | 60 | 60 | 60 | 90 | 60 | 90 |
| Max pump Capacity Kg/cm | 1.5 | 1.5 | 1.5 | 2.0 | 1.5 | 2.0 |
| Cooling Water Pipe/inch | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 | 1/2 |
| Process Fluid Pipe/inch | 1/2*4 | 1/2*4 | 1/2*6 | 1/2*8 | 1/2*4 | 1/2*8 |
| Exter Net Dimens ion L*W*H(mm) | 650*340*580 | 650*340*580 | 750*400*700 | 750*400*700 | 650*340*580 | 750*400*700 |
| Weight | 58 | 58 | 75 | 95 | 58 | 75 |
1. Standard
PVC Insulated Control Cable is manufactured according to the standard of GB9930 "Polyvingyl chloride insulated Control Cable", IEC60502 [Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30kV",and the same time is also manufactured according to the standard of IEC, English, Germany and America.
2. Applications
PVC insulated and sheathed control cable is suitable to the interconnection in controlling, signalling, protecting and measuring systems with rated voltages up to and including 450/750V or 0.6/1kV.
3. Operating characteristics
Rated power-frequency voltage Uo/U: 450/750V or 0.6/1kV.
Max. Permissible temperature operating temperature of conductor: 70℃
The ambient temperature under installation should not below 0℃, if the ambient temperature is lower than 0℃, the cable should be preheated.
The bending radius of cable are recommended as follows:
Non-armoured cable: not less than 6 times of the cable diameter.
Armoured or copper tape screened cable: not less than 12 times of the cable diameter.
Screened fiexible cable(flexible control cable) less than 6 times of the cable diameter.
Pvc Insulated Control Cable ,Cca Pvc Insulated Control Cable,Multi-Core Pvc Insulated Control Cable,Water Proof Pvc Insulated Control Cable
Shandong Shinegoo Group , http://www.cnshinegoo.com